We already covered the several types of electric fireplaces available. We also went over with you how to shop for a power fireplace. In the event that you’re scanning this article, you’ve likely already purchased an electrical fireplace, or you’re just about ready to, and also you want to ensure the installation process goes smoothly. Great idea!
We’ve put together this helpful guide to walk you step-by-step through an electric fireplace installation. We’re using the Napoleon Alluravision for our example, however, the installation process should be pretty similar for other electric fireplace models. Nevertheless, always recommend your product’s user manual for specific instructions.
Every product will have its own framework requirements, clearances, and other technical specs we won’t be able to cover here. Can You Have an Electric Fireplace In An Apartment?
Getting Began Installing an Electrical Fireplace
Prior to starting your setup, make sure to review your user guide. We recommend reading your instructions cover to cover at least one time before you start the project. This can ensure all producer requirements have already been met. In addition, you’ll understand what tools and equipment you will need to complete the task.
Safety Factors in a Fireplace Installation
Safety should be your main concern setting up your fireplace. It is particularly important for appliances with included heaters like the Alluravision. Manufacturers’ expulsion requirements ensure satisfactory distance from butanol materials in order to avoid possible fire hazards. This kind of includes external things like decorative mantelpieces and any things which may accidentally block the heater grille, as well. In addition to clearances, make certain to be aware of the value of proper electrical safety. This kind of product should be installed far away from options of water (including water vapor and humidity). You should also ensure your product is properly grounded by only using this machine with a grounded outlet. Your open fireplace ought not to be used with an extension power cord.
Electric Fireplace Functioning
Although we’ve already stated clearance to vivre, it’s also important to make note of clearances for products such as electronics. For example, many homeowners choose to install their electric fireplace under a television. Malfunction allowing for proper space between your heater and the television set can damage the television set over time.
Assessment of Your Electric Open fireplace
After carefully undoing your fireplace from its box, it is very important to carry out a quick test of the appliance. Though it is very unlikely you’ll have any issues with your new machine, it’s much better to address any difficulty with the product before it’s installed into a wall or other structure.
To be able to test your open fireplace, simply plug the supplied electric wire into a 120V, 12-15 Amp minimum grounded outlet. You’ll want to test light, heat, and other features to make certain everything is in proper working order. When you’ve deemed your product fully detailed, you’re ready to proceed with your installation.
Steps for Installing an Integrated Electric Open fireplace
- Frame The Installation
The first step in putting in your electric fireplace (after taking treatment of the requirements mentioned above, of course) is to frame your setup. In your consumer manual, you will find framing specs for your electric fireplace. These specifications will list the dimensions you will need to reduce in order to create an area to insert your fireplace.
For the Napoleon Alluravision setup manual, the elevation and width requirements get for all units in the series. Additionally, two separate depths are given, with one for the Slimline model and another for the Heavy Depth model. Make sure to confirm your product type before starting installation.
In addition, the Napoleon Allure Visions verse box will be situated underneath the remaining corner of the installation (when experiencing the wall). Always be sure to consider this during your installation, as you will need to access the product later.
- Remove Attached Pieces As required to Continue Installation
Placing up your electric fireplace, you may need to remove several pre-attached bits of the fireside to facilitate assembly. This step may vary significantly relying on your unique model of fireplace.
Intended for Napoleon Alluravision, you will want to remove the front glass of the appliance by removing the assembly screw and disengaging the glass with the installation conference. Given the large scale of the goblet as well as its weight, we recommend performing this step with a couple.
In addition to the top glass removal, you will need to take out Napoleon Alluravision’s plastic-type material panel holders found on either side of the appliance. In the event that side covers are installed before the setup, these will have to be removed, as well.
The Napoleon Alluravision requires left, right, top and bottom part trim pieces to be secured to each side of the unit. Safe these pieces with the included cut fasteners before moving on to Stage 3
.It’s important to note this step might not be necessary on the electric fireplace model you have purchased. However, a unit might have its own mounting brackets or other trim items which will be needed to continue with the installation. Make reference to your installation manual for more information.
- Test Attach Appliance in Walls
Next, hold your appliance up to the framed portion of your wall. The objective of this step is to ensure a proper fit before continuing the setup process. If required, make any corrections to your installation before continuing. For that Napoleon Alluravision, additionally, you will need to apply shims (not supplied) between appliance and framework.
- Link Electrical Supply
If desired, the next thing will be to hard-wire the application into the home wiring. Please notice, this step should only be taken on by way of a qualified electrical contractor. This will likely ensure safe and reliable functioning. Refer your electrical contractor to the electrical wiring instructions in your user manual for more information.
This specific appliance must be electrically attached and grounded in obedience with local requirements if hardwired. Inside the absence of local codes, use the latest ANSI/NFPA 75 National Electrical Signal for installations in the United Claims. Also, be certain to leave enough line so the appliance can be removed from the enclosure and serviced if necessary.
Re-order Components As Needed to Continue Unit installation and Secure the dryer in the Wall structure
The order with this step may be reversed depending on your model of fireplace. Again, this guide offers basic guidelines, and you ought to send to your open fireplace manual for clear solutions for your product. Up to this point, the typical process for putting in electric fireplaces is pretty similar, but according to the way your product has been designed, there can be significantly more variance with this step forward.
With that being said, the Napoleon Alluravision should be secured throughout this step of the installation process. Make use of the four included anchoring screws to secure the appliance into the walls. Do not overtighten the screws throughout the installation.
If you removed any components during Step 2, you will probably need to reattach them for this step now that the appliance is with the wall. With regard to the Alluravision, this means reinstalling the Invisalign aligner screen holders you removed earlier..
- Reinstall Front side Glass
After putting the fireplace media in the media holder, reinstall the front side cup of the device using the reverse of the steps you followed previously. For that Alluravision, align the pins on the applying, move the cup in and right down to engage with the brackets, and secure the very best middle area of the front side goblet using the unit installation screw. Once secure, you will need to pay for the attachment with the cover plate.
- Enjoy A new Open fireplace!
Your fireplace should now be properly installed and looking forward to using it. Enjoy the extra warmth and mood in your room!. Now would be a fantastic time to consider your end-user manual to review all operational handles for your open fireplace. For the Napoleon Alluravision, this includes flame control, high temperature, ember bed light, and temperature control.
Read more about this website: myworldnews24.com
You should visit this site: getliker.com
